Installation instructions

Connecting wires in sockets is done by screws. Connection of conductors on switches, depending on the type of their connection, is done by simply inserting screws or blank part of the conductor (the part of the conductor with the insulation removed) in the provided opening. In the case of removing the conductors from the switch with screwless connection it is necessary to press the corresponding button which releases the conductor from spring contact and then simply pull it out.

Switches for installation in a wall:

1)      Turn off the power supply (fuse, main switch);
2)      Remove button(s), and frames of the switch;
3)      Prepare the wires for the switch (remove the insulation in the length of 10mm);
4)      Execute the prepared connecting wires to the appropriate connection diagram;
5)      The subassembly put in the plastic cup of the switch, align it and tighten the screws;
6)      Attach the decorative frame and push-button(s) switch;
7)      Turn the power supply on;

Outlet socket-outlets for installation in a wall:

1)      Turn off the power supply (fuse, main switch);
2)      Unscrew the central screw on the lid and remove the slot cover;
3)      Prepare the wires for the socket (remove the insulation in the length of 10mm);
4)      Execute the prepared connecting wires to the appropriate connection diagram;
5)      The subassembly put in the plastic cup of the socket, align it and tighten the screws;
6)      Install the slot cover;
7)      Turn the power supply on;

Switches for installation on the wall:

1)      Turn off the power supply (fuse, main switch);
2)      Remove button and top box switches;
3)      On cabling editorials make holes by cable diameter suitable for installation;
4)      Attach the lower switch box to the location provided for the installation;
5)      Prepare the wires for the switch (remove the insulation in the length of 10mm);
6)      Execute the prepared connecting wires to the appropriate connection diagram;
7)      To continue the circuit grounding use screw placed in the lower box of the switch;
8)      Install the top box and the button of the switch;
9)      Turn the power supply on;

Sockets for installation on the wall:

1)      Turn off the power supply (fuse, main switch);
2)      Loosen the screws on the top box connector and remove the top box;
3)      On cabling editorials make holes by cable diameter suitable for installation;
4)      Attach the lower socket box to the location provided for the installation;
5)      Prepare the wires for the socket (remove the insulation in the length of 10mm);
6)      Execute the prepared connecting wires to the appropriate connection diagram;
7)      Install the top box and the button of the socket;
8)      Turn the power supply on;

Installation should be carried out by qualified personnel!